HC-B 10-I-CT-M

https://www.phoenixcontact.com/us/products/1648212 Contact insert - HC-B 10-I-CT-M - 1648212 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON male insert, B10 series, 10-pos., for crimp contacts Product Features  For fast coding with plastic profile   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 53.24 g Custom tariff number 85366990 Country of origin China Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of B10 type, crimp contacts CK 2,5-ED (crimp contacts not included in the scope of supply). Connection method Crimp connection Pollution degree 3 Overvoltage category III Constructional and testing regulations DIN EN 61984 DIN EN 60664 IEC 60352 Number of positions 10+PE Insertion/withdrawal cycles ≥ 500 Type B10 Connection in acc. with standard IEC / EN Conductor cross section 0.5 mm² ... 4 mm² Connection cross section AWG 20 ... 12 12/22/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1648212 Contact insert - HC-B 10-I-CT-M - 1648212 Technical data General Stripping length of the individual wire 7.5 mm Assembly instructions Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HCB10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. Connection For housing type B10. Connectors may only be inserted when there is no load/the power is switched off. Use a screwdriver to remove the crimp contacts. The opening for the screwdriver is next to the opening where the conductor is inserted. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Degree of protection IP20 Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PA Standards/regulations PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 500 V Rated surge voltage 6 kV Rated current 16 A Standards and Regulations Connection in acc. with standard IEC / EN CSA Constructional and testing regulations DIN EN 61984 DIN EN 60664 IEC 60352 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 12/22/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1648212 Contact insert - HC-B 10-I-CT-M - 1648212 Classifications eCl@ss eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 20-12 12/22/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1648212 Contact insert - HC-B 10-I-CT-M - 1648212 Approvals     Nominal current IN 20 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 22-14 Nominal current IN 13 A Nominal voltage UN 600 V cUL Recognized      mm²/AWG/kcmil 22-14 Nominal current IN 13 A Nominal voltage UN 600 V EAC  EAC  cULus Recognized  Drawings 12/22/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1648212 Contact insert - HC-B 10-I-CT-M - 1648212 Schematic diagram Diagram 6 1 7 2 8 3 9 4 10 5 Operating current [A] 32 28 24 20 B10 B10 16 B6 12 B6 B24 B16 8 B16 B24 2 4 1 = 1,5 mm2 2 = 2,5 mm 0 Connector pin assignment, connection side 0 2 1 20 40 60 80 100 120 0 20 40 60 80 100 120 Ambient temperature [°C] Derating diagram Dimensional drawing Dimensional drawing 59 49 20 27 Ø3,4 35 57 27 34 32 64 57 Male insert Mounting cutout when used without housing Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/22/2015   Page 5 / 5